Jump to main content
Framery One
Framery O
Framery Q
Framery 2Q
Search
Home
Framery O
Framery O
Troubleshooting
Flip the bent door upside down
Reinstall the lock case
Framery O
Framery O
Installation
Maintenance
Troubleshooting
Framery O Troubleshooting
Level the floor
Adjust the door height
Reinstall the door seal
Check that the power cord is connected to the power unit
Reset the fuse
Check the power outlet cord connection
Check all the electrical connections
Check the connection between the roof module and wall module DC cords
Diagnose a faulty motion sensor
Check that the fan cord is connected to the control unit
Check the fan module's electrical connections
Check that the light cord is connected to the control unit
Check the light's electrical connections
Adjust the fan speed
Flip the bent door upside down
Disconnect the power cord
Remove the door handle
Remove the lock case
Flip the door upside down
Reinstall the lock case
Install the door handle
Connect the power cord
User manual
Other manuals
Reinstall the lock case
Reinstall the lock case upside down to the door with 4x25 screws (2 pcs).
