Install the mounting rails
-
Measure the end of the first mounting rail 429 mm (16 7/8 in) from the back edge of the
roof.
Note: Place the mounting rail at 10 mm (6/16 in) from the center of the roof. Use the body cover center line as the midpoint reference.
-
Mark three places for screw holes on the roof body cover.
Mark the first screw at 500 mm (19 11/16 in), the second at 608 mm (23 15/16 in), and the third at 715 mm (28 1/8 in).
-
Measure the center of the second mounting rail 117 mm (4 5/8 in) from the body cover
center line.
-
Mark three places for screw holes on the roof body cover.
Mark the first screw at 500 mm (19 11/16 in), the second at 608 mm (23 15/16 in), and the third at 715 mm (28 1/8 in).
-
Drill 4 mm (3/16 in) pilot holes (6 pcs) through the roof body cover and the wood
underneath.
Note: Make sure that you do not drill too deep.
-
Install the mounting rails with 5x50 screws (3 pcs each) and washers (3 pcs each) onto
the roof of the pod.