Install the cylinder and sprinkler

Note: Make sure that the piping or the sprinkler head is not damaged during the installation.
  1. Guide the piping into the hole in the roof and place the cylinder onto the mounting rails.
    Place the cylinder in the center of the mounting rails.
  2. Slide the bands into the mounting rails from both sides and tighten the bands around the cylinder.
  3. Remove the protective paper from the sticker on the first rubber seal.
  4. Guide the rubber seal around the piping and attach the seal onto the roof body cover around the hole.
  5. Remove the protective paper from the sticker on the second rubber seal.
  6. Guide the rubber seal around the sprinkler head and attach the seal onto the ceiling felt around the hole.
  7. Install the sprinkler guard over the sprinkler.