Replace the power unit

Note: Set all removed parts aside carefully and neatly. All removed parts, excluding the one being replaced, will be needed for reassembly.
  1. Disconnect the power cord.
    If equipped with the optional LAN, also disconnect the LAN cord from the outlet.
    DANGER: Always disconnect the pod from the power outlet before you begin disassembly, maintenance, moving, or any other procedure.
    Figure 1. * = optional LAN
  2. Remove the plastic trims from the techwall.
  3. Remove the wall body cover from the techwall.
  4. Remove the screws from the cover of the power unit and open the cover.
    Figure 2. * = With the optional wireless charger
  5. Disconnect all of the electrical cords from the power unit.
  6. Remove the old power unit from the techwall.
  7. Install the new power unit to the techwall.
  8. Connect all of the electrical cords to the new power unit.
  9. Install the wall body cover.
  10. Install the plastic trims.
  11. Connect the power cord.
    If equipped with the optional LAN, also connect the LAN cord to an outlet.
    Figure 3. * = Optional LAN cord