Jump to main content
Framery One
Framery O
Framery Q
Framery 2Q
Search
Home
Framery 2Q
Lounge
Troubleshooting
Framery 2Q Troubleshooting
Straighten the pod
Framery 2Q
Huddle
Lounge
Installation
Maintenance
Troubleshooting
Framery 2Q Troubleshooting
Push the back glasses together
Stretch the seal and reinstall it
Adjust the automatic door seal
Straighten the pod
Disconnect the power cord
Remove the bottom cover plates
Remove the roof body covers
Remove the wall body covers
Remove the bottom body covers
Remove the wall cover panels
Remove the roof cover panels and plates
Straighten the pod
Check that the acoustic panels are straight
Remove the seals and install them on the inside of the pod
Remove the seals and replace them
Cut the side frame seal to the correct length
Install an adjustment plate under the lower hinge
Check that all electrical connections are secure
Turn the ON/OFF switch of the power unit in the "I" position.
Connect the power outlet cord
Check that the connections to the control unit are secure
Check that the light cords are connected to the control unit
Connect the DC cords
Check that the fan cords are connected to the control unit
Check that fan blades can move freely
Reduce the fan speed
Clean all the ventilation channels
Check that the electrical connections of the fan modules are secure
Adjust the settings from the control unit
Diagnose a faulty motion sensor
Without furniture
Straighten the pod
Disconnect the power cord
Remove the bottom cover plates
Remove the roof body covers
Remove the wall body covers
Remove the bottom body covers
Remove the wall cover panels
Remove the roof cover panels and plates
Straighten the pod
