Install the movability kit and move the pod

Installing the movability kit -video:

Note:
Only push the pod below the vertical middle, do not tow it.
Note:
Only move the pod at walking speed.
Note:
Only move the pod on even surfaces. The pod can cross thresholds a maximum of 3 mm.


  2. Warning:
    Risk of injury. Do not stand on the floorboards of the pod.

  3. Note:
    Make sure to lift the pod evenly from all corners.
    Note:
    Carefully push the pod to the new location. When the pod is at the new location, immediately remove the movability kit.


Note:
After moving the pod, tighten the back glass screws and make sure that the door closes properly. See sections Tighten the screws of the back glass wall and Adjust the door for instructions.