Install the seismic anchoring

Assemble the pod chassis according to the installation instructions.

  1. Warning:
    Work on and finish one corner at a time. Do not unscrew more than one corner at a time.



  5. Drill holes for the anchors.
    Verify the required hole depth with anchor guidelines.
    Note:
    Drill bit size is based on the anchor selected.
  6. Clean the drilled holes according to anchor guidelines.
  7. Install the anchors.
    The thickness of the seismic anchoring brackets is 0.7 in (17.8 mm). The hole diameter in the brackets is 0.55 in (13 mm)
    Note:
    You can use either of the two holes. (Wood floors may require both holes to be used.)
    Note:
    The anchors are not included.
  8. The anchors should be torqued to bolt manufacturer's guidelines. It is important to check both the bolt manufacturer's literature and the Professional Engineering calculations for this project.
  9. Continue the pod installation according to the installation instructions.