Move the pod

DANGER:
Always disconnect the pod from the power outlet before you begin disassembly, maintenance, moving, or any other procedure.
Warning:
Risk of injury. Do not enter the pod when it is standing on the casters.
  1. Screw in the leveling feet (4 pcs, clockwise) with a 7 mm (9/32 in) wrench, so that the pod stands on the casters.
  2. Carefully push the pod to the new location.
    Note:
    Only push the pod below the vertical middle, do not tow it.
    Note:
    Only move the pod at walking speed.
    Note:
    Only move the pod on even surfaces. The pod can cross thresholds a maximum of 3 mm (1/8 in).
  3. When the pod is at the new location, immediately screw out (counterclockwise) the leveling feet with a 7 mm (9/32 in) wrench.
    Note:
    Make sure that the leveling feet are past the casters and lightly touching the floor. The leveling feet are against the floor when you feel resistance.