Install the frames



  2. Note:
    Hit the bottom plates gently with a hammer to remove them.

  3. Note:
    Align the holes on the floor support with the holes on the side of the floor module.
    Note:
    Insert bolts only partially through the holes.

  4. Note:
    Do not tighten the nuts completely. Keeping them slightly loose at this point makes aligning the screws to the frame easier later.

  5. Warning:
    Hold the door frame upright while another installation technician secures it to the floor module.


  7. Warning:
    When the door frame and glass wall are installed to the floor module, the structure is unstable until the frames are connected. Hold the glass wall upright until another installation technician installs a support beam between the frames.



  10. Note:
    When attaching the table wall support to the frames, be careful not to bend the hook on the support.