Check the connections at the control hub

Warning:
Always disconnect the pod from the power outlet before you begin disassembly, maintenance, moving, or any other procedure.
  1. Remove the plug from the power outlet.
    If equipped with the optional LAN, also disconnect the LAN cord from the outlet.
  2. Remove the fan cover.
  3. Check that the CAN cord is connected to the CAN connector of the control hub.
  4. Check that the cords of the fans are connected to the FAN connectors of the control hub.
  5. If only one of the fans is not working, remove both fan cords from the connectors and test the connectors with the cord from the working fan.
  6. Check that the cords of the occupancy indicator lights are connected to the OCC connectors of the control hub.
  7. Install the fan cover.
  8. Connect the power cord.
    If equipped with the optional LAN, also connect the LAN cord to an outlet.
  9. Reset the table. See Reset the table.