Remove the glass wall

Save all removed parts and set them aside carefully and neatly. All removed parts will be needed for reassembly.
  1. Lay a carpet on the floor behind the pod.
    Note:
    The carpet is needed to protect the frame from scratches.
  2. Remove the pins (6 pcs) and open the latches (6 pcs) around the glass wall.
    Note:
    Support the glass wall while opening the latches.
  3. Carefully lower the glass wall onto the carpet.
    Note:
    Make sure that the guide pin at the upper edge of the frame stays in place.
  4. Remove the guide pin from the frame.