Install the slit trims and table

  1. Install the slit trims.
    Note:
    Make sure that the hammer nut is in the vertical position.
  2. Install the screws to the top ends of the slit trims and at the lower ends of the slit trims, turn the hammer nuts to the horizontal position.
    Note:
    Do not overtighten the screw at the top end of the slit trim.
    Tip:
    Insert the long end of the hex key into the top of the screw and rotate the short end to avoid overtightening.
  3. Place the new tabletop onto the table bracket.
  4. Install the tabletop to the table bracket with screws.
  5. Connect the spiral cord to the electrical equipment in the table.
  6. Install the strain relief for the spiral cord.
  7. Install the table bottom felt.