Install the seismic anchoring (retrofit)



  2. Note:
    Make sure to protect the gaskets from dirt during the assembly.

  3. Note:
    Make sure to protect the gaskets from dirt during the assembly.






  9. Note:
    Coat hook is an option.

  10. Warning:
    Work on and finish one corner at a time. Do not unscrew more than one corner at a time.



  14. Drill holes for the anchors.
    Verify the required hole depth with anchor guidelines.
    Note:
    Drill bit size is based on the anchor selected.
  15. Clean the drilled holes according to anchor guidelines.
  16. Install the anchors.

    The thickness of the seismic anchoring brackets is 0.7 in (17.8 mm).
    The hole diameter in the brackets is 0.55 in (13 mm)

    Note:
    You can use either of the two holes. (Wood floors may require both holes to be used.)
    Note:
    The anchors are not included.
  17. The anchors should be torqued to bolt manufacturer's guidelines. It is important to check both the bolt manufacturer's literature and the Professional Engineering calculations for this project.

  18. Note:
    Coat hook is an option.