Move the pod

DANGER:
Always disconnect the pod from the power outlet before you begin disassembly, maintenance, moving, or any other procedure.
Warning:
Risk of injury. Do not enter the pod when it is standing on the casters.
  1. Remove the carpet.
  2. Remove the kickboards.
  3. Screw the leveling feet all the way in (4 pcs, counter-clockwise) with a 7 mm (9/32 in) wrench, so that the pod stands on the casters.
    Optionally, screw in the leveling feet (4 pcs) with a 10 mm wrench from the outside.
  4. Carefully push the pod to the new location.
    Note:
    Only push the pod below the vertical middle, do not tow it.
    Note:
    Only move the pod at walking speed.
    Note:
    Only move the pod on even surfaces. The pod can cross thresholds a maximum of 3 mm (1/8 in).
  5. When the pod is at the new location, immediately screw out (clockwise) the leveling feet with a 7 mm (9/32 in) wrench. Level the floor of the pod.
    Note:
    Make sure that the leveling feet are past the casters and lightly touching the floor. The leveling feet are against the floor when you feel resistance.
    Note:
    Measure the opposite points with a spirit level repeatedly and adjust the leveling feet gradually. Only screw the leveling feet outward, to make sure that they all stay past the casters.
  6. Reinstall the kickboards.
  7. Reinstall the carpet.