Check all the electrical connections (Q Working with PAL)

  1. Detach the light from the ceiling.
    Note: Support the light, do not let it hang by its cord.
  2. Check the connections to the control unit.
  3. Reinstall the light.
    Note: Make sure that the cords are not damaged or pinched during the installation.
  4. Remove the screws from the table base plate and the floor board.
  5. Remove the screws from the bracket under the table top.
  6. Tilt the table toward the door.
  7. Open the lid of the metal box.
  8. Check the electrical connections in the floor
  9. Check the electrical connections to the optional wireless charger in the floor.
  10. Close the lid of the metal box.
  11. Reinstall the screws to the table base plate and the floor board.
  12. Connect the power cord of the pod to a power outlet and check that the fans and light function normally.
  13. Disconnect the power cord.