Replace all body covers

Note: Set all removed parts aside carefully and neatly. All removed parts, excluding the one being replaced, will be needed for reassembly.
  1. Disconnect the power cord.
    If equipped with the optional LAN, also disconnect the LAN cord from the outlet.
    DANGER: Always disconnect the pod from the power outlet before you begin disassembly, maintenance, moving, or any other procedure.
    Figure 1. * = optional LAN
  2. Remove the fan cover.
    Figure 2. * = With optional activated carbon filter
  3. Remove the plastic trims.
  4. Remove the roof body cover.
  5. Remove the wall body covers.
  6. Remove the front floor body cover.
  7. Remove the back floor body cover.
  8. Replace the old body covers with the new ones and install in the reverse order.