Install the fire suppression system

  1. Cut away the flap on the roof body cover. Use side cutters or a drill.
  2. Cut away the flap on the roof . Use side cutters or a drill.
  3. Cut away the acoustic material. Use a utility knife or a hole saw.
    Note: Do not cut through the roof.
    Note: Make sure that the hole in the acoustic material is as small as possible. Use the sprinkler as a size guide.
  4. Cut away the flap on the roof under the acoustic material. Use side cutters or a drill.
  5. Drill a pilot hole through the ceiling panel to the middle of the hole.
  6. Flip the roof module the other way round.
  7. Draw the cut line to the ceiling panel from inside. Use the sprinkler cover as a drawing guide.
  8. Cut away the marked aread from the ceiling panel. Use a utility knife.
  9. Install the sprinkler to the ceiling panel with screws (4 pcs).
    Note: The maximum recommended screw size is 5x35.