Remove the table and techwall panel

  1. Remove the bottom felt from the table.
  2. Disconnect the electrical connections in the table.
  3. Remove the strain relief for the spiral cord.
  4. Remove the screws from under the table.
  5. Remove the table from the bracket.
  6. Remove the screw from the top end of both slit trims and loosen the screw of the hammer nut at the lower end.
    Note: Do not remove the screw of the hammer nut. Only loosen it enough to turn the hammer nut vertical.
  7. Remove the slit trims.
  8. Remove the old techwall panel.