Jump to main content
Framery One
Framery O
Framery Q
Framery 2Q
Search
Home
Framery Q
Meeting Maggie
Troubleshooting
Reinstall the floor threshold
Framery Q
Meeting Maggie
Installation
Maintenance
Troubleshooting
Framery Q Troubleshooting
Push the glasses together
Replace the seals
Stretch the seal and reinstall it
Level the floor
Straighten the pod
Reinstall the floor threshold
Cut the threshold seal to the correct length
Install an adjustement plate under the lower hinge
Remove the seals and install them on the inside of the pod
Diagnose a faulty motion sensor
Check connections under the floor cover board
Turn the ON/OFF switch of the power unit in the "I" position
Check connection to power unit
Check that the connections to the control unit are secure
Check fan modules' connections
Check that fan blades can move freely
Reduce the fan speed
Reinstall the screw
User manual
Other manuals
Flow
Flip 'n Fold
Reinstall the floor threshold
Remove the floor threshold and reinstall it.
