Tighten all the screws

  1. Tighten the table top screws: M5x10 screws and wronic 4.25x25 screws.
    Note: Do not overtighten the M6x20 screw in the turnable table (Framery Q Meeting Maggie).
    Figure 1. Framery Q Meeting Maggie
    Figure 2. Framery Q Working with PAL
  2. Tighten the table leg M6x20 screws and the support beam M6x12 screws (Framery Q Flow).
  3. Tighten the table base plate screws: M6x20 countersunk screws and 5x50 screws.
  4. Tighten the screws on the table installation bracket. (Framery Q Working with PAL).
  5. Tighten the wronic 4.25x25 screws in the sofa legs (Framery Q Meeting Maggie).
  6. Tighten the black 5x50 coat hook screws.
    Tip: If the coat hook does not feel secure, remove it, move it slightly towards the glass wall and install it again.