Install the seals

  1. Seal the back of the pod with a wedge-shaped seal between the glasses and frames.
    Note: Install the seal on the outside of the back of the pod and cut off any excess.
    Tip: Use glass washing liquid as a lubricant to help install the seal.
    Tip: Carefully push the glasses to the inner edge of the groove to make the installation easier. Make sure that the glasses stay aligned.
  2. Install the wedge-shaped seal to the front side glasses from the inside of the pod.
    Note: Make sure you install the seal on the inside and cut off any excess.
    Tip: Use glass washing liquid as a lubricant to help install the seal.