Install the display bracket

Note: Installation requires 2 people.
  1. From outside the booth, install the back plate of the display bracket and one rubber plate to the installation holes in the center glass.
    Note: Make sure that the glass and the display bracket are installed the correct way round for the interior intended to be installed.
  2. Support the parts on the outside of the center glass and, from the inside of the pod, install the remaining rubber plate and middle plate onto the threaded pegs of the back plate.
  3. From inside the booth, install the front plate onto the threaded pegs of the back plate.
  4. Secure the assembly with M6 socket cap nuts (4 pcs).