Tighten all the screws

  1. Tighten the screws on the door handles.
    Note: Do not overtighten the set screws. Insert the long end of the hex key into the screw head and rotate the short end.
  2. Remove the carpet.
  3. Tighten the screws on the base of the chair.
  4. Tighten the screws on the chair leg.
  5. Tighten the screws on the base of the footrest.
  6. Tighten the screw on the footrest.
  7. Remove the table bottom felt.
  8. Tighten the screws under the table.
    Figure 1. Without the optional wireless charger
    Figure 2. With the optional wireless charger
  9. Install the table bottom felt.
  10. Tighten the screw on the coat hook.
  11. Install the carpet.