Check the connections in the wall

  1. Remove the plastic trims from the techwall.
  2. Remove the wall body cover from the techwall.
  3. Check that the connections at the table control unit are secure.
    Figure 1. Without the optional wireless charger
    Figure 2. With the optional wireless charger
  4. Remove the screws from the power unit cover and open the cover.
    Figure 3. * = With the optional wireless charger
  5. Check that the connections in the power unit are secure.
    Figure 4. Without the optional wireless charger
    Figure 5. With the optional wireless charger
  6. Close the power unit cover and secure it with the previously removed screws.
    Figure 6. * = With the optional wireless charger
  7. Install the wall body cover.
  8. Install the plastic trims.
    Note: Make sure that you install the plastic trims the correct way around.