Reinstall the door handle

  1. Loosen the set screw on the outside handle.
  2. Adjust the spindle at least 5 mm to find a new spot for the set screw to pierce the spindle.
    Note: Do not turn or rotate the spindle in any way, because it can only be pierced on one side.
  3. Install the handle with the spindle attached to it into the lower mounting hole from the outside of the door.
    Note: Turn the screw holes on the handle to correspond to the ones in the door.
  4. Push the counterpart handle onto the spindle and attach the handles with M5x32 screws (2 pcs) from the inside.
    Use a manual screwdriver to tighten the screws. Do not overtighten.
    If the handle does not return easily to the starting position, loosen the screws slightly and check the handle function again.
    Note: Turn the screw holes on the handle to correspond to the ones on the door.
    Note: Make sure that there is no gap between the cover plates and the door.
  5. Tighten the set screw on the inside handle.
    Note: Tighten the set screw. The resistance increases steadily until the screw pierces the spindle. In the final position, the head of the set screw is left with 1-2 threads visible.
  6. Install the upper cover plates with M4x30 screws (2 pcs).
    Do not overtighten.
    Note: Make sure that you install the smooth cover plate to the outside.