Check all the electrical connections (2Q Standard)

  1. Detach the light from the back ceiling.
    Note: Support the light, do not let it hang by its cord
  2. Disconnect the light cord from the control unit.
    Set the light aside.
  3. Check that the short fan extension cord is connected to the fan DC cords.
  4. Detach the light from the front ceiling.
    Note: Support the light, do not let it hang by its cord
  5. Detach the light cord from the light extension cord connector.
  6. Check that the long fan extension cord is connected to the fan DC cords.
  7. Detach the motion detector from the ceiling.
  8. Check that the motion detector cord is connected to the motion detector.
  9. Reinstall the motion detector.
  10. Check the the cord from the power outlet / GST extension cord is connected to the AC splitter.
  11. Check the connections to the control unit.
  12. Check that the ON/OFF switch of the power unit is in the "I" position.
  13. Check that the power cord is connected to the power unit.
  14. Connect the light cord to the LED 1 connector of the control unit.
  15. Reinstall the light onto the front ceiling, edge to edge with the motion detector.
    The light attaches to the ceiling with magnets.
    Note: Make sure that the light and motion detector are are aligned. Use the ceiling felt center line as the midpoint reference.
  16. Reinstall the light onto the back ceiling, edge to edge with the motion detector.
    The light attaches to the ceiling with magnets.
    Note: Make sure that the light and motion detector are are aligned. Use the ceiling felt center line as the midpoint reference.