Install Tap meeting room touch controller

Tap meeting room touch controller is connected to Rally Bar Mini or the meeting room computer with the Cat5e Kit. The kit consists of a Tap Receiver that connects Tap to a dongle transceiver through a power supply. The dongle transceiver is connected to the USB port of the video bar or the meeting room computer depending on the meeting room configuration.
  1. Remove the two screws from the back of the Tap and remove the bottom cover.
  2. Connect the Tap Receiver into the USB-C connector on the bottom of the Tap.
    Note: Slide the Tap Receiver gently into the slot on the bottom of the touch controller.
  3. Connect a LAN cord to the Tap Receiver and route it out through a slot on the back of the touch controller.
  4. Attach the bottom cover with two screws.
  5. Connect the LAN cord from the Tap Receiver to the OUT port of the power supply.
  6. Connect a second LAN cord to the IN port of the power supply.
  7. Connect the second LAN cord to the dongle transceiver.
    Note: If Rally Bar Mini is installed according to these instructions, the dongle transceiver is already connected to the USB port on the video bar.
  8. Attach a plug adapter to the power supply and connect it to a power outlet.