Install the table

  1. Attach the side table bracket to the table top with black 5x30 screws (2 pcs).
    Note: Install the bracket at the ready-made holes.
  2. Install the table support leg to the table with black 5x30 screws (2 pcs).
    Note: Install the leg at the ready-made holes.
  3. Install the power outlet to the bracket under the table.
    Turn the power outlet so that it catches on the grooves of the bracket.
    Note: Check that the power outlet cord is behind the power outlet.
  4. Pull off the cord duct cover.
  5. Guide the power outlet cord through the cord duct and through the table support leg.
  6. Press the duct cover into place.
  7. Position the table on the wall and the bracket of the support leg into place under the sofa.
    Note: Make sure that the seal on the wall is in the middle of the table bracket.
  8. Install the table support leg to the sofa with black 5x30 screws (2 pcs).
    Do not tighten fully until the table is in place and level.
  9. Install the table to the wall with black 5x30 screws (4 pcs).
    Note: Use a spirit level to make sure that the table is level.
    Note: Make sure that the seal on the wall is in the middle of the table bracket.
  10. Connect the power outlet cord to the AC extension cord.