Install the lights

  1. Connect the light at the back to the light extension cord connector.
  2. Install the light wires to the roof with 4x20 screws.
  3. Install the light onto the back ceiling, edge to edge with the motion detector.
    The light attaches to the ceiling with magnets.
    Note: Make sure that the light and the motion detector are aligned. Use the ceiling felt center line as the midpoint reference.
  4. Connect the cord of the remaining light to the LED 1 connector of the control unit.
  5. Install the light wires to the roof with 4x20 screws.
  6. Install the light on the front ceiling, edge to edge with the motion detector.
    The light attaches to the ceiling with magnets.
    Note: Make sure that the lights and the motion detector are are aligned. Use the ceiling felt center line as the midpoint reference.