Install the display bracket and display (optional)

  1. Push the table against the back wall.
  2. Detach the wall bracket from the display bracket.
    Note: Make sure that you pull from the cord to release the locking.
  3. Install the display bracket to the display with the supplied nuts (4 pcs).
    Note: Make sure that the display bracket is in the center of the display.
    Note: Make sure that the square hole on the display bracket is at the lower end of the bracket.
  4. Install the base plate of the display bracket to the left-hand side wall with 4x40 screws (4 pcs).
    The height of the base plate depends on its size.
    Note: Make sure that the seal on the wall is in the middle of the base plate.
    Note: Make sure that the base plate is vertically straight before tightening the screws.
  5. Install the wall bracket onto the base plate with M6x8 screws (2 pcs).
    Note: Make sure that you check the straightness of the base plate.
    Note: Make sure that the release mechanism cord is downwards.
  6. Install the display bracket to the wall bracket.
    Note: Make sure that the latch is locked in place.