Replace the occupancy indicator lights

Note:
Set all removed parts aside carefully and neatly. All removed parts, excluding the one being replaced, will be needed for reassembly.
  1. Disconnect the power cord.
    If equipped with the optional LAN, also disconnect the LAN cord from the outlet.
    DANGER:
    Always disconnect the pod from the power outlet before you begin disassembly, maintenance, moving, or any other procedure.
    Figure 1. * = optional LAN
  2. Remove the fan cover.
    Figure 2. * = With optional activated carbon filter
  3. Remove the plastic trims.
  4. Remove the roof body cover.
  5. Remove the wall body covers.
  6. Disconnect the old occupancy indicator lights from the control hub and remove them from the pod.
    Note:
    For reassembly, make a note of which corners the lights were removed from.
  7. Install the new occupancy indicator lights to the pod and connect the cords to the OCC connectors of the control hub.
    Install the new occupancy indicator lights to the same corners from which the old ones were removed.
  8. Install the body covers, plastic trims, and fan cover in the reverse order.
  9. Connect the power cord to the power outlet.
    If equipped with the optional LAN, also connect the LAN cord to the outlet.
    Figure 3. * = optional LAN