Change the door handedness (optional)

  1. Remove the spring and ball joint studs. Remove the plugs covering the installation holes in the other end of the frame.
  2. Install the ball joint studs and spring to the opposite end of the frame. Install the plugs to the installation holes in the other end of the frame.
  3. Remove the protective caps and loosen the screws from both hinges.
    Note:
    Do not use sharp tools to remove the caps. The frame scratches easily.
  4. Interchange the shim plates at both hinges.
  5. Remove the spacer from the hinge and install it to the other hinge.
  6. Tighten the hinge screws and install the protective caps.