Attach the mounting templates to the door (one handle has come off)

  1. Remove the old glue from the glass with the scraper.
  2. Separate the adhesive strips.
    Remove the liners from one side.
  3. Attach three adhesive strips to both mounting templates as shown in the following image.
  4. Attach the mounting template for the inner side over the backplate.
    If the inner handle has come off, install the mounting template for the outer side first.
    Note:
    The smaller mounting template is for the inner side.
    Note:
    Align the mounting template with the backplate as shown in the following image.
  5. Attach the other mounting template on the outside of the door. Align the edges of the templates as shown in the following image.
    Note:
    The mounting template with the longer edge is for the outer side.