Install the Framery alarm sensor

DANGER:
Always disconnect the pod from the power outlet before you begin disassembly, maintenance, moving, or any other procedure.

Framery alarm sensor is an additional device that can be installed to an already assembled pod. It consists of two separate components: the alarm repeater and alarm sensor. The alarm repeater is connected to the pod core unit in the roof module.




  4. Remove one rivet from the right-side corner of the ceiling interior panel and three rivets from between the ceiling interior panel and right-side wall interior panel.
  5. Shorten the charging cable. Make two loops of 350 mm of the charging cable. Fasten the loops with zip ties. Connect a USB-A to USB-C adapter to the alarm sensor charging cable.


  8. Add double-sided tape to the repeater casing and install the casing to the ceiling interior panel below the ceiling light.